Along this we are using only quality components and consumables. The process of repair work is performed on specialized equipment in a specially equipped room.
For those organization managers who are seeking for saving and therefore using services of “black refillers” or are permitting cartridge refilling in their rooms, we would like to notice that such processes are not only unhealthy for human respiratory system, but also may cause asthmatic illnesses.
HOW TO DISTINGUISH OUR CARTRIDGES FROM OTHERS?
According to developed and attested technology, all cartridges having undergone our production, apart from whether they were refilled, renovated or produced as a ready product, are packaged and marketed according to settled regulations.
DESCRIPTION, TECHNICAL SPECIFICATION
Cartridge Cleaning WorkStation™
Cartridge cleaning working station SCC
WorkStation - this is a working station of closed cycle, equipped with two filters of cartridge type (standard filters) and one HEPA filter. Power supply and compressed air should be provided for the work of this station.
Single-phase network of alternating current with voltage 220 V. Power consumption – 4.4 kW.
For the normal work of station compressed air should be supplied, volume 0.054 m3 per minute @ pressure 6.8 bar.
(Two filters of cartridge type, one – HEPA filter), SCC.
Two filters of cartridge type, one – HEPA filter:
1. | Dimensions 1,6 x 1,2 x 0,73 m | |
2. | Filtration efficiency 99.997% for particle size of 0.3 micrometers | |
3. | Resource of upper filter fine cleaning is 4000 hours | |
4. | Gradual methods of cleaning: | |
4.1.1. | Direct facture of hard toner fractions into waste collector | |
4.1.2. | Air cleaning by means of two cartridge filters from particles more than 5 micrometers | |
4.1.3. | Final air cleaning by fine cleaning filter, 0.3 micrometers | |
5. | Built-in cleaning system of standard filters. | |
6. | Indicator of filter pollution level. | |
7. | Capacity of built-in engine – up to 1000 m3/hour. |
Standard filters are intended for preliminary rough air cleaning from particles sized up to 0.5 micrometers with efficiency 99.99%.
Final cleaning of air flow is performed on HEPA filter which provides prevention of particles up to 0.3 micrometers with efficiency 99.997%. Noise level with these implemented filters is not higher than 72.5 dB.
100 liter air compressor.
We offer you to choose this model because it provides sufficient power for performing the work. Unfortunately, air compressors with less volume are quickly loosing their ability to deal with standard amount of work and are producing much more noise as well.
1. Average size of toner particles is 6 micrometers
2. Amount of clearedout toner
These both conditions are limiting the choice. We recommend using ATRIX HCTV as it is constructed especially for these tasks.
Compressed air ionizer. This equipment is not necessary during cartridge refill or renovation process. Ionizer is provided for taking off electrostatic potential from cartridge work surfaces and its components. The usage of ionizer allows improving quality of the final product and reducing time spent on production of one product.